I am trying to branch out a bit from just dressed. I set myself a task that every month I would have to sew at least one thing that wasn’t a dress. This time I chose a bra. Well more specifically a practice bra using simplicity 8228:
The entire thing is new materials so the thread was the only thing that got used from my stash. It needed stretch lace, power mesh, picot elastic and narrow elastic. Once I opened up the instructions I realized I needed spray adhesive to attach to the powder mesh to the lace and then cut out and sew as one. I was too anxious to start so I skipped it and just cut everything out on its own. It’s fine, I got it done but I think that the adhesive would make the job a lot easier. Also the sizing on this pattern is the most ridiculous thing I have ever seen. It put me at a 38DD. I couldn’t stop laughing. I cut an A cup and it fits just fine. I might choose to go up a band size in the next one.
For being a practice run I think it turned out pretty well but there are plenty things I would change so I am glad I didn’t use my favorite lace.
Obviously the biggest boo-boo is in the center bottom seem with the edges and scallops not matching up. Next time I will probably just cut the whole front band on the fold to avoid that seam.
The pattern is a little high on the underarm fat/side boob area so I might re-draft that pattern piece for comfortability.
The racer back comes up really high. Not sure if i want to scoop it out more or just skip the racer all together and attach straps from the cups to the back band more like a normal bra
It sounds like I have a lot of complaints but really it’s quite comfortable and perfect for someone like me who doesn’t need a ton of support.
The insides are not that neat. I think its a combination of several things: the pattern, the fact I didn’t use spray adhesive, and I wasn’t able to find matching elastics in a price range I was willing to spend. Also It seems like the very bottom edge of the power mesh is never permanently attached. I could see this rolling up and being annoying. I will wear the bra for a while and if I really bothers me I can just leave it off the front band and the lower back band for round 2.
I always assumed bras would be a very difficult sew but this little puppy took me 2 hours at most after it was cut out. If the mesh was attached to the lace I could see it going much faster. But before I make another I think I have earned myself a dress!
I’m soooo glad that I decided to plough ahead and do a wool coat in spring because it’s snowing today and I have had more than one opportunity to wear it already. For some reason I figured Butterick 6385 was the easier of the two coats on the one I should work on first. In reality I think that it was just the least expensive of the two ( less and lower cost fabric) so If I messed it up I wouldn’t feel as bad. The pattern itself was harder.
The fabric I used was a 100% wool coating from Fabric.com in the color Cafe au Lait. I bought it during one of their 70% off sales so I scored 3 yards for just $36. Turns out I only needed 2 yards….and suggestions on how to use the last yard? Once it arrived it seemed a bit thin (again, hindsight it was probably fine). After reading an article on threads called Understanding Underlining I decided some flannel would make a cozy addition to the interior. Boy was it time intensive! First you cut out the flannel out of the same pieces as the coat. Then stack them and baste down the middle. Trim the flannel to account for turn of cloth. The hand baste the flannel to the wool and treat as a single piece. I think the extra effort was worth it because it made the coat super warm and toasty but I don’t think I will be using it on my blue coat because everything got very bulky.
Once I stitched the panels together I trimmed the flannel pressed the seams open and then catch-stitched all the seams by hand hoping to alleviate some of that aforementioned bulk.
So much hand work, my fingers were hating me! At this point I took a break to make my easter dress.
Having never done a coat before I found some interesting details in the pattern. I’m not sure it this is standard or not but I think it makes my coat seem more special. The lining has its own separate pattern pieces and the center back includes a little pleat to allow extra mobility across the back in between the shoulder blades.
The pocket (per the pattern) has wool on the side touching you and lining on the other side. So if the pocket peaks open you only see wool but the bulk is reduced by using lining for the other half
The lining is attached around the wrists and neck but is allowed to hand free across the bottom. I took a quick look at my Calvin Klein coat and i’ts made the same way. I liked this because the lining doesn’t pull in any weird way. I did some thread chains to attach the lining at the various seams. I also catch stitch the coat hem so there are no visible topstitching.
Enough construction notes…you want to see this puppy on right! You’ll notice it’s missing buttons. I bought some nice big wooden ones but when it came time for buttonholes I could not get my machine to do them. It made them just fine when I did a test on double thickness of wool but for some reason it’s just too thick to work on the coat. I could sew the holes by hand with a blanket stitch but I’m worried that it would look to messy and I would hate to mess up all the work I did with messy button holes. For the time being it’s to be a closureless coat. Lesson learned, do bound buttonholes on the next coat ( that one only has two so it shouldn’t be too bad).
I can’t help but feel like a girl-boss when I wear this coat. It turned out almost exactly like I envisioned.
I thought I would take a break from my winter coat and join in on the spring dress sewalong. When I picked up this fabric I was thinking a mod 60s style shift dress but then quickly retreated back to my fit-n-flare comfort zone and used Simplicity 1873 instead.
I sewed the View C bodice with the longer skirt of view A. Boy I am glad I did because this is just on the cusp of being shorter than I like.
The fit isn’t the best. I must admit I heard about this sew along a while ago when Akram first posted it on We Sew Retro but I didn’t know I was going to participate until last week so I didn’t have time to muslin. In retrospect I probably did but this is the excuse that I am telling myself.
I cut a 14, some reviewers said that the waist was too small and since the pattern didn’t have any finished waist measurements I walked the pattern and it did seem awfully small so I graded it out to a 16 at the waist. Mistake. I should have just done what I always do and cut a straight size. At least now I know for next time! It’s OK now I have extra room in the dress if I need to eat a whole ham or something.
By design the bodice ends just above the natural waist but I would prefer it to be dropped another inch. Also The back is quite high and I didn’t have any zippers that long so I scooped out the back which I think looks more flattering anyway.
I love the pleat design in this pattern, I will definitely use it again when I have directional prints. This dress only used 3.36 yards ( I had asked for 3.5 yds but this was all that was left on the bolt). In any case I feel like that’s pretty economical considering the bodice is self-lined and the skirt looks twirly.
For the buttons I hemmed and hawed over what to use. I did not want to go out and buy more since my button stash is sort of out of control. I had robins egg blue buttons that I liked witht the fabric but they weren’t big enough. I ended up using these which are vintage self covered button blanks. I was going to cover them but then I sort of liked the way the brushed metal looked with the fabric and Tony agreed and so it was.
This dress was a good break from all the hand sewing on my coat and I managed to knock it out in a day and a half. More importantly the weather is actually starting to turn around here so I even got to wear it already!!!! The bodice needs some adjusting but I think this is a good basic dress pattern and I won’t be surprised it I sew it up a few more times.
I apologize for my lapse in posting. I have been trying to get a youtube channel up and the weathers been so grey and gloomy that it has been difficult to take photographs. Also I have now managed to stuff my stash full of fall/winter fabric just in time for spring so i’m sort of at a quandary of “what to make next”. I am sort of wanting to make a wool coat but fear that being out of sync with the seasonings will make for a bad blog post….Im coming into that dangerous time were the the blog is starting to dictate the sewing and not the other way around which is not were I want to be!
For todays dress I used the bodice of Butterick 5814 and a self drafted skirt.
I spent weeks working on the bodice and ran into a slew of fitting issues. I wanted to lengthen the front but of course the pattern didn’t provide any lines . I also tried to raise the neckline a tad for modesty ( though I think its still a little bare and I may add some lace in later). I also futzed around with the sleeves since they kept falling off. I eventually got it to an OK place but i’m not 100% pleased with it. The pleats in the bodice create some fullness that Im not loving. I tried to take my time and tried some new (to me) techniques. I used some twill tape to stabilize the bias cu v-neck and back line. I also added in so stay tape before sewing in the zipper.
The bodice also has spiral steel boning added to the lining. I made casing for the boning out of rayon seam binding from my stash. It’s all inclosed inside the lining so you won’t see the green when it is done.
The skirt was a headache as well. I used an online tutorial for how to flat draft the skirt and the first muslin had these wacky wide fins on my hips. It took 3 more tries before I got something I was happy with and even still I had to pull the dress on and off a half dozen times shaving millimeters off to get the perfect fit. I also contemplated for a while on what to do with the lining. The fashion fabric has a slight stretch to it which makes sitting down in a form fitting pencil skirt a little more comfortable. However I knew I wanted to wear this dress with heels which means stockings are needed and that means slippery lining. I ended up putting in a full lining out of matching bemburg. I left the skirt lining bigger then the fashion fabric in order to accommodate thigh spread when sitting. I am happy I did because I think it adds a luxurious feel to the finished dress.
You’ll also notice from the above picture that I added a kick pleat to the lined skirt. I am very happy with how this turned out though I don’t think I would self-draft this again. I want to try and find a pattern that already has it included so that I can get the precise angles.
At least for now I feel like all the effort was worth it because I feel like Marilyn when I put it on even if the bodice is bit wonky!
Unfortunately the fabric doesn’t photography well. The sheen of the sateen brings out every little wrinkle. If you want to see the dress in motion Click Here
As the weather warms up I thought it was time to sew up another of my vintage saris. This time I chose a silk one and the Maxi version of the Anna dress from By Hand London.
According to the envelop you need 5+ yards of fabric but I have found that the skirt on this dress is WAY WAY WAY longer then any person needs so I ignore the cut layout and have the skirt cut on the cross grain instead.
I was able to cut the whole dress out of 3 yards of fabric ( 45″ wide). Since I had so much fabric left over I also did a self lining and underlined the top of the skirt. I have never worked with 100% silk before and this was not an easy task. It was so light and ethereal which made it a major pain to sew. The finished dress is OK but I would be pretty embarrassed to wear it out of the house. It’s comfortable so I am treating it as a glamorous house dress for days when I want to put a little more effort than just yoga pants.
I was really in love with my “whine” pants from last week but I couldn’t find much in my closet that would work with them. Well that’s a problem that is easily remedied. I had in my mind a classic 40s shirt with collar and short sleeves. Simplicity 1590 had enough of the elements that it would make a good jumping off point.
I used view B with the collar but I didn’t want the peplum or the ties. I re-drafted the front and back pattern to just extend straight down and tested it out with some junk green fabric. The white bits in the pictures are the parts of the pattern that I added on. I lengthened the back piece by about 6 inches and then extended the front middle to go all the way across. After doing this green muslin I ended up flareing out the sides of these a bit more to accommodate my hips.
The original pattern had normal triangular darts. At first I tried making them into double pointed darts but I wasn’t in love with the way it looked. I ended up doing dart tucks that extend 2″ above the waist and 1″ below the waist. I like how it reduces the bulk of the fabric when it’s tucked in but still has that blousy look
Since the embroidery was such a success on my girly confection dress I decided to try it again in a much subtler way. I bet you didn’t even see it.
The real question is how does it look with my pants….exactly how I imagined!
I have had this pattern for quite some time now and never got around to making anything from it other then stealing the skirt pieces for another dress. I bought a pair of pine green wide leg trousers a few months back and I really loved the way looked on my so I figured this was a good pattern to start with for a me-made version.
The end result was everything I had hoped. The only thing I would change would be to add some pockets and do a curved waistband.
So why are they my whine pants? Well first off they are wine colored but I had such a hard time making them that I was whining the whole time! Don’t get me wrong the pattern is actually pretty easy to make but I was a bit of a perfectionist and redid several parts 2 or 3 times ( Zipper, Cuff, and Waistband)…also when I finished Tony whined that I made another retro pattern.
I made a couple of alterations. I added 2″ to the front and back crotch length ( so 4″ total) it makes it hang a little low but it’s just perfect when I go to sit down so I’ll take it. Also most of the authentic 40s pants seem to do the same thing. I also added 5″ to the length of the pants. Some of that additional length was used to make cuffs. I think the cuffs really help to anchor the wide leg and help it hang better. Finally I widened the waistband to be 2″ though I wish I had curved it so it would have sat close to the body better.
This was my first lapped zipper. I must have watched that tutorial 8 times and it still took me 3 attempts before I sewed it correctly. I overcame my obstacles in the end!
I took a fellow bloggers advice and put the zipper in first and then adjusted the fit along the darts. Boy did it need adjusting. In the picure you can see how I more then doubled the length of the front dart and widened them. I also took in the center front and back seems as well. After it was all said and done I think I took in almost 3″
All the effort was worth it because I think they hang beautifully and they make my legs look ten feet long.